Hikvision CCTV IP Camera Default Usernames, Passwords and IP Addresses Setting For EBULWARK customers, what should I do if I forget to log in to the system and password? Like usernames, passwords, and IP addresses are all covered in this article. The information found on this page may apply to a variety of system app 1) disconnect power to the camera (either through the 12VDC or POE source) 2) press and old the reset button. 3) while holding down the reset button, apply power back to the camera. 4) hold the reset button for 30+ seconds and then release. 5) the camera should finish booting up and be reset to factory settings. To reset your HikVision IP Camera back to factory defaults, you should disconnect it from its power supply first. Press the reset button and hold it. At the same time, plug the camera back to the electrical socket to restore its power without releasing the button. Keep holding the button for about 10-15 seconds. Release the reset button. Cara Mudah Reset Password CCTV HIKVISION Dengan Benar. Kalian harus pastikan kabel LAN DVR CCTV konek ke router dan terhubung satu sama lain (satu jaringan) Jika sudah download kalian instal dan buka, disana akan terdeksi perangkat DVR kalian. Centak pada DVR tersebut dan pada menu, kalian pilih paling bawah Forgot Password. Louiseliu007 managed to reset the password on my Hikvision also ( running v5.4.XXX firmware) . I bought a secondhand camera and I wasn't aware of the strict policy of Hikvision regarding passwords. I thought the camera would be unsuable as Hikvision Europe refused to reset the password. 1. Press and hold the reset button on the camera for a total of 1.5 minutes (90 Seconds). 2. After the first 30 seconds disconnect the network cable with your other hand, do not let up on the reset button. Wait 30 seconds. 3. Re-connect the network cable, again do not let up on the reset button. Wait 30 seconds. .

reset password ip camera hikvision